Economical Budget- Complete food & beverage production line
Professional liquid filling & packaging solutions
Fast & Good service system
Turn-key project

KBM

0086 188 6222 6180

Bottle Blowing Machine
KBM2 Automatic 2 Cavities blow molding machine
  Nov 28, 2012        Posts by : admin        682

KBM-Automatic 2 Cavities blow molding machine-A2

Product Description:

 KBM-A2 is the fastest liner blow molding machine in mainland of China by now. 

 KBM-A2 reaches around 2200BPH for 350ML bottle every hour. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.

 KBM-A2automatic stretch blow molding machine is equipped with patented preform loading system, which consists of two manipulators: rectilineal manipulator and overturning manipulator. The rectilineal manipulator moves preform with neck up to the preform holder, after heating, the overturning manipulator grips heated preform and overturn 180 put preform to blow station with neck down. After stretching and blowing, the bottle is taken off by overturning manipulator. The specially designed preform loading & bottle discharging system avoid possible damage to preform & bottle during transportation.

KBM-A2is controlled by PLC. The whole process from preform feeding to bottle discharging is completed automatically with advantages of labor saving and no pollution. KBM-A2consists of three main parts: preform loading system, Heater channel & blow station.

Operation:

The standard operation of KBM-A2 stretch blow molding machine includes four steps as follow

Step 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.

Step 2. Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.

Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.

Step 4. The finished bottle is taken off by automatic discharging system

Features:

A. Stable performance with advanced PLC.

B. Conveying preforms automatically with conveyor.

C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.

E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

H. Strong clamping force with high pressure and double crank links to lock the mold.

I. Two ways of operating: automatic and manual.

J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

L. Contamination is avoided for the bottle body.

M. Ideal effect of the chilling with the chilling system.

N. Easy installation and starting

O.Low rejection rate: less than 0.3percent.

Technical parameter

TYPE

ITEM

UNIT

KBM-A2 technical data

Container

Product material

/

PET

Container volume

L

0.05-2.0

Theoretic output

Pcs/hr

2200

Preform length

M

50-200

Max height of bottle

M

320

Molding

Preform inner diameter

mm

15-60

Bottle diameter

mm

35-110

Max mold plate dimension (L × W)

mm

380 × 460

Max mold thickness

mm

200

Air compressor

High pressure compressor

M3/Mpa

2.0/30 × 1set

Locking force

KN

170

Mold opening stroke (adjustable)

mm

200

Low pressure compressor

M3/Mpa

2.0/30 × 1sets

Air dryer

M3/Mpa

2.0/30 × 1sets

Main machine electricity

Power

KW

30

Voltage / frequency

V/Hz

380/50hz

Machine size and weight

Main machine (L × W × H)

M

3.2 × 1.8 × 2.0

Main machine weight

T

3.2

Conveyor (L × W × H)

M

1.4 × 1.1 × 1.85

Conveyor weight

T

0.4

High pressure compressor (L × W × H)

M

1.90 × 0.75 × 1.50 × 1sets

Low pressure compressor (L × W × H)

M

1.85 × 0.75 × 1.50

High pressure air reservoir tank (D × H)

M

0.70 × 2.25/3.0

Air dryer (L × W × H)

M

0.85 × 0.50 × 0.95

Air filters

Kg

10 × 3pc

Cooling water: cooling water recycling system can be used with its power of 8~10 liter per minute and 2~3 kilos water pressure.

Total power: 51.9 high pressure air volume (1m/min); low pressure air volume (1.2m/min)

Safety

Auto emergency alarm

Safety inter-locking device

As an leading beverage machinery manufacturer in China. KBM will suppliy high quality Water Filling Machine, Juice Filling Machine, Bottle Filling Machine, Water Treatment, Reverse Osmosis and other filling system for our global clients.


Send
Massage